Motip Spray Glue – 600ml

Usage instructions

• The surface should be clean, dry and free of grease. The aerosol should have room temperature.
• Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes.
• Distance to the surface to be treated approximately 25 to 30 centimetre.
• Apply glue in an equal layer.
• For a permanent adhesion, treat both parts to be glued, allow to dry 15 to 20 minutes and firmly press together.
• For a temporary adhesion, treat one of the parts to be glued, allow to dry for 5 to 10 minutes and firmly press together.
• When treating porous surfaces, apply several layers.
• After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).